Configurator — Deck holder and deck box

A deck holder fitted to your sleeved cards for comfortable drawing. An STL file ready to slice for your 3D printer: the shop prints nothing, the material is up to you, and PLA is a good choice among others.

1. Card size

Preset:

Sleeved cards, margin included: the preset sets the inner dimensions below.

Specific size

X width (mm):

Y length (mm):

Inner dimensions on the print bed; the walls are added around them.

2. Height

Height preset:

Specific height

Z height (mm):

Inner wall height: how much of the deck stays covered.

3. Variant

Deck holder or deck box:

Deck holder (drawing) Deck box (storage)

The deck holder tilts the deck for drawing; the deck box stores it standing.

Landscape: swap X and Y

Wall style:

Decorated walls Straight walls

Duo: two deck holders side by side sharing the centre wall

4. Cart

€0.99

On sale from 01/09/2026

Ordering and payment happen from the cart, in one go for all your items.

Preview

3D preview unavailable: your browser does not support WebGL.

Wall 1.2 mm · base 1.2 mm

The preview shows the exact piece that will be generated; the downloaded STL file contains this model, ready to slice.

The final result depends on your printer, material and settings — all at your discretion.

Specifications

Files: One binary STL file, generated from your configuration.
Language: No text: the file is language-independent.
Dimensions and scale: Model in millimetres, at 1:1 scale: the dimensions you choose are those of the printed part.
What you need: A slicer and a 3D printer. The shop prints nothing.